ACDelco AC-G0002 instruction manual Generator Components, Muffler - Reduces the engine noise level

GENERATOR COMPONENTS

Observe the locations and functions of the various components and controls of this generator.

(1)120/240 Volt AC Outlet - Used for connecting electrical devices that run on 120 and/or 240 Volt, 60 Hz, single phase, AC current.

(2)Ground Terminal - Used for connecting grounding wires to properly ground this generator.

(3)120 Volt AC Outlet - Used for connecting electrical devices that run on 120 Volt, 60 Hz, single phase, AC current.

(4)Voltage Selector - Used to select between 120 or 240 Volt output.

(5)Circuit Breaker- Reset switch that protects this generator from electrical overload.

(6)12 Volt DC Outlet - Only used for charging 12 Volt automotive- type batteries.

(7)Oil Filler/Dipstick Cap - Location for checking and filling the engine crankcase oil.

(8)Engine Switch - Used for starting/stopping the engine.

(9)Recoil Starter - Pull-cord for starting the engine.

(10)Fuel Filter Cup - Traps dirt and water from the fuel prior to entering the engine.

(11)Fuel Valve - Allows gasoline to pass into the engine.

(12)Air Filter - A removable, cleanable, sponge-like element that limits the amount of dirt pulled into the engine.

(13)Choke Lever - Adjusts the amount of air allowed into the engine.

(14)Fuel Gauge - Indicates the amount of gasoline remaining in the fuel tank.

(15)Fuel Tank Cap - Access to the fuel tank for adding gasoline.

(16)Volt Meter - A gauge indicating the voltage output.

(17) Muffler - Reduces the engine noise level. (18) Spark Plug - Provides ignition to the engine.

Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator 10