62 Chapter 3
Disassembling the Main Unit
Separate the main unit into the logic upper and the logic lower assembly
1. Disconnect the FFC.
2. Disconnect the FDD FPC..
3. Remove the 7 screws on the upper case.
4. Turn out one screw on the rear panel.
5. Then remove the two (one on each side) screws on the button pane...
6. Remove the 5 screw on the right panel.
7. Then separate the logic upper from the logic lower.
Disassembling the logic upper
1. Turn out the seven holding the right and the hinge saddles. Then remove the hinge saddles.
2. Remove the five screws that secure the EMI shielding. Then remove the EMI shielding.