Chapter 4 79NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undetermined Problems” on page 81.Peripheral-Related Symptoms
Symptom / Error Action in Sequence
System configuration does not match the
installed devices. Enter BIOS Setup Utility to execute “Load Setup defaults”, then
reboot system.
Reconnect hard disk/CD-ROM/diskette drives.
External display does not work correctly. See “ System Diagnostic Diskette” on page 48
See if there is an error beep. If there is an erro beep, then change
main board.
Power off. Then check if RAM CPU BIOS are well-connected.
Press Fn+F5 three times slowly
LCD FPC
LCD inverter
LCD
USB does not work correctly See “System Diagnostic Diskette” on page 48
Main board
Print problems. Ensure the “Parallel Port” in the “System Devices” of BIOS Setup
Utility is set to Enabled.
Onboard Devices Configuration
Run printer self-test.
Printer driver
Printer cable
Printer
Main board
Keyboard/Touchpad-Related Symptoms
Symptom / Error Action in Sequence
Keyboard (one or more keys) does not work. Reconnect the keyboard cable.
Keyboard
Main board
Touchpad does not work. Reconnect tou chpad cable.
Touchpad board
Main board
Modem-Related Symptoms
Symptom / Error Action in Sequence
Internal modem does not work correctly. See “System Diagnostic Diskette” on page 48.
Modem phone port
modem combo board
Main board