NOTE: Please arrange the LCD inverter cable well to the LCD panel as the picture below shows when you reassemble the LCD module.
Removing the 15” TFT LCD
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Launch Board” on page 54.
4.See “Removing the LCD Module” on page 55.
5.See “Removing the LCD Bezel” on page 57.
6.See “Removing the Inverter Board (15” LCD)” on page 57.
7.To remove the LCD, first remove the four screws that secure the LCD hinges.
8.Then take the LCD out of the LCD panel.
Chapter 3 | 58 |
