Removing the VGA Thermal Plate
1.See “Removing the Battery” on page 50.
2.See “Removing the Middle Cover” on page 54.
3.See “Removing the Keyboard” on page 61.
4.See “Removing the Middle Cover Hook” on page 61.
5.See “Removing the Thermal Module” on page 61.
6.See “Removing the Processor” on page 62.
7.Remove the seven screws that fasten the VGA thermal plate, then disconnect the RTC battery cable. Detach the VGA thermal plate from the main board.
Removing the Upper Case Assemly
1.See “Removing the Keyboard” on page 61.
2.Disconnect the touchpad cable.
3.Remove the 5 screws that secure the upper case to the lower case. Then turn over the main unit and remove the 15 screws holding the lower case to the upper case.
4.Then take the upper case assembly off the main unit.
63 | Chapter 3 |
