Acer 3620 manual Change password

English

56

Change password

Acer eRecovery Management and Acer disk-to-disk recovery are protected by a password that can be changed by the user. Follow the steps below to change the password in Acer eRecovery Management.

1Boot to Windows XP.

2Press <Alt> + <F10> to open the Acer eRecovery Management utility.

3Enter the password to proceed. The default password is six zeros.

4In the Acer eRecovery Management window, select Recovery settings and click Next.

5In the Recovery settings window, select Password: Change Acer eRecovery Management password and click Next.

6Follow the instructions on screen to complete the process.

Note: If the system crashes, and will not boot to Windows, you can run Acer disk-to-disk recovery to restore the factory default image under DOS mode.