Acer 4020 manual Output Ratings CV mode, Output Ratings CC mode, Dynamic Output Characteristics

AC Adapter

Item		Specification
Frequency variation range	47 - 63
(Hz)
Nominal voltages (Vrms)	90 - 264
Inrush current	The maximum inrush current will be less than 50A and 100A when
	the adapter is connected to 100Vac(60Hz) and 240Vac(50Hz)
	respectively.
Efficiency	High efficiency 85% minimum, at 100~240Vac AC input, full load,
	warm-up condition.
Output Ratings (CV mode)
DC output voltage	Offers constant voltage 19.0V output source with 150W max output
	power capacity.
Noise + Ripple	300mvp-pmax (20MHz bandwidth) for resistor load
Output current	0 A (min.)	3.5A (max.)
Output Ratings (CC mode)
DC output voltage	18.0 ~ 20.0
Constant output	7.9A
Dynamic Output Characteristics
Start-up time	3 sec. (@115 Vac and 230Vac full load)
Hold up time	5ms min. (@115 Vac input, full load)
Over Voltage Protection	25V
(OVP)
Short circuit protection	Output can be shorted without damage, and auto recovery
Electrostatic discharge	15kV (at air discharge)
(ESD)	8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary	4242 Vdc for 1 second-
Leakage current	60uA at 240Vac/60Hz
Regulatory Requirements	1. FCC class B requirements (USA)
	2. VDE class B requirements (German)
	3. VCCI classII requirements (Japan)
Power Management
ACPI Mode		Power Management
Mech. Off (G3)	All devices in the system are turned off completely.
Soft Off (G2/S5)	OS initiated shutdown. All devices in the system are turned off
	completely.
Working (G0/S0)	Individual devices such as the CPU and hard disk may be power
	managed in this state.
Sleeping State (S3)	CPU Power Down
	VGA Power Down
	PCMCIA Suspend
	Audio Power Down
	Hard Disk Power Down
	Super I/O Power Down
Sleeping State (S4)	Also called Hibernate state. System saves all system states and data
	onto the disk prior to power off the whole system.

28 Chapter 1