Error Message List
Error Messages | Check or do the following in sequence: |
|
|
No beep, | Power source (battery pack and power adapter). See “Power |
LCD is blank. | System Check” on page 89. |
| Ensure every connector is connected tightly and correctly. |
| Reconnect the DIMM. |
| LED board |
| Mainboard |
|
|
No beep, | Power source (battery pack and power adapter). See “Power |
LCD is blank. | System Check” on page 89. |
| Reconnect the LCD connector |
| Hard disk drive |
| LCD inverter ID |
| LCD cable |
| LCD Inverter board |
| LCD |
| Mainboard |
|
|
No beep, | Reconnect the LCD connectors. |
LCD is blank. But you can see POST on an | LCD inverter ID |
external CRT. | LCD cable |
| |
| LCD inverter board |
| LCD |
| Mainboard |
|
|
No beep, | Ensure every connector is connected tightly and correctly. |
blinking cursor shown on LCD during | Mainboard |
POST. |
|
No beep during POST but system runs | Speaker |
correctly. | Mainboard |
|
|
Chapter 4 | 93 |