6.Locate the hardware gap. The gap is highlighted in the illustration below.
Hardware gap | Default setting | Operation Description |
|
|
|
G67 | Open (Normal) | Short to clear supervisor and user password. |
|
|
|
7.Using an electrical conductivity tool, short the two contacts on the hardware gap together.
8.While resting the tool on the two contacts, plug one end of the AC adapter into the
9.Press the power button to turn on the system.
10.After BIOS POST message, remove the tool from the hardware gap.
11.Reinstall the memory modules and lower cover.
12.Restart the system and press <F2> during the bootup to enter the BIOS setup screen.
13.Repeat above procedure if the BIOS password is not cleared.
40 | Chapter 2 |
