Acer 5532 manual Main, Information, Security, Boot, Exit, Enter

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

				PhoenixBIOS Setup Utility
Information		Main	Security		Boot	Exit
System Time:			[09:00:00]				Item	Specific Help
System Date:			[12/12/2008]				<Tab>, <Shift-Tab>, or
System Memory:			634 KB				<Enter> selects field.
Extended Memory:			1790 MB
Video Memory:			[256MB]
Quiet Boot:			[Enabled]
Network Boot:			[Enabled]
F12 Boot Menu:			[Disabled]
D2D Recovery:			[Enabled]
SATA Mode:			[IDE AHCI]
F1	Help	Select	Item	F5/F6	Change	Values	F9	Setup	Defaults
Es c	Exit	Select	Menu	Enter	Select	Sub-Menu	F10	Save	and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed with 24-	Format: HH:MM:SS
	hour format.	(hour:minute:second)
System Date	Sets the system date.	Format MM/DD/YYYY
		(month/day/year)
System Memory	This field reports the memory size of the system.	N/A
Extended Memory	This field reports the Extended Memory size.	N/A
Video Memory	This field shows the memory allocated for the video	N/A
	graphics.
Quiet Boot	Allows startup to skip certain tests while booting,	Option: Enabled or
	decreasing the time needed to boot the system.	Disabled
Network Boot	Enables, disables the system boot from LAN (remote	Option: Enabled or
	server).	Disabled
F12 Boot Menu	Enables, disables Boot Menu during POST.	Option: Enabled or Enabled
D2D Recovery	Enables, disables D2D Recovery function. The function	Option: Enabled or
	allows the user to create a hidden partition on hard disc	Disabled
	drive to store operation system and restore the system
	to factory defaults.
SATA Mode	Control the mode in which the SATA controller should	Option: AHCI or IDE
	operate.

Chapter 2 25