Replacing the ODD Module
1.Press the bezel into the tray, bottom edge first, to secure it to the ODD Module.
3.Push the ODD Module into the ODD bay until it is flush with the casing.
Replacing the Lower Covers
1.Replace the Memory Cover as shown.
2.Secure the ODD bracket with the two (2) screws.
4.Replace the one (1) screw to secure the Module.
2.Replace the HDD Cover as shown.
IMPORTANT: Press down around the perimeter of the covers to ensure that the all the securing tabs are correctly located in the casing.
Chapter 3 | 115 |
