Acer 707 Technical information, Self test pattern, Safety protection, Timing guide, Page

2.3 Self test pattern

The monitor may display a three colors test pattern. This is to indicate that the monitor is functioning properly, but the computer’s video signal is not reaching the monitor. In this case, please make sure the video cable is properly connected. The test pattern will disappear when the monitor is able to receive the video signal. However, if the test pattern does not display all three colors (blue, green and red), the monitor is not functioning properly. Please contact your local dealer for assistance.

2.4 Safety protection

The safety protection function is protecting for the monitor itself. When frequency of video signal from computer’s was out of range, (please refer to monitor “specifications”) The monitor will protect by itself and a warning message of OSD will appear on the screen, warning you to resetting monitor type on your computer.

2.5 Timing guide

This multi-scanning monitor can automatically detect and display several video modes. If the monitor recognizes one of preset timing signals, it will reset that mode and any stored display adjustments you have made.

The factory preset modes as indicated in the following table

Mode	Resolution	Fh.	Fv.	Mode	Resolution	Fh.	Fv.
	(dots x lines)				(dots x lines)
1	720 × 400	31.47	70	7	800 × 600	63.90	100
2	640 × 480	31.47	60	8	1024 × 768	48.36	60
3	640 × 480	43.27	85	9	1024 × 768	60.02	75
4	800 × 600	46.87	75	10	1024 × 768	68.67	85
5	800 × 600	37.88	60	11	1600 × 1200	75.01	60
6	800 × 600	53.67	85

Fh: Horizontal Frequency (KHz)

Fv: Vertical Frequency (Hz)

Page 4

3.Technical information

3.1Products specifications

Picture tube (flat Screen CRT)
Size:	17-inch (43.18 cm) diagonal
Dot pitch:	0.25mm
Surface / transmission:	Tinted screen glass non-glare, black matrix
Maximum viewable area	16.02” (40.69cm) diagonal
Display size (factory setting)	310 mm (H) x 230 mm (V)
	12.20 inch (H) x 9.06 inch (V) ( Adjustable)
Synchronization range
Horizontal frequency:	30-86KHz
Vertical frequency:	50-160Hz
Max. Resolution	1600x1200
Recommended resolution	1024x768 /85Hz
Dot Rate	150MHz
Power supply (universal)
Input Voltage:	AC 100-240V 60/50 Hz
Consumption:	110 watts maximum.
Input signal	Video: Analog 0.7Vp -p / 75 Ohms
	Sync. : Separate sync. TTL level
Display Analog Input	Unlimited Number of colors
	(depends upon video card)
Weight
Net :	18.5kg (40.7Lb)
Gross :	21.0kg (46.2Lb)
Unit dimension (W x H x D)	410 x 412 x 420 (mm)
Operating condition
Temperature:	5°C~40°C (41°F to 104°F)
Humidity:	20	~ 80
Storage condition
Temperature:	-20°~60°C (-4°F to 140°F)
Humidity:	10	~ 90
DDC1/DDC2B (Plug and Play)	VESA standard

NOTE: All technical specifications are subject to change without notice.

Page 5