Chapter 4 - Installing Optional Components 4-7
4.3 Disassembling and Reassembling the
System
When upgrading, you may need to disassemble your system in order to access the system
board and other components inside the system.
To disassemble the system:
1. The metal cover inside the housing gives additional support to the housing’s
structure. To remove the metal cover, remove two screws located on the inner side of
the metal bracket (the screw attaches the metal bracket to the riser card). Insert two
fingers into the hole and gently draw it back as you lift it up.
Figure 4-6 Detaching the Metal Cover
Metal Cover
Riser Card