Acer AL1715 Detaching LCD Monitor from Its Stand, Interface for Arm Applications

Detaching LCD Monitor from Its Stand

Unscrew screws the swivel base support column and pull down the hinge to release.

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Connecting the Display

1.Power off your computer.

2.Connect one end of the signal cable to the LCD Monitor’s VGA port.(See Fig 1-5)

3.Connect the other end of the signal cable to the VGA port on your PC.

4.Make sure connections are secure.

Connecting the AC Power

1.Connect the power cord to the LCD Monitor.(See Fig. 1-6)

2.Connect the power cord to an AC power source.

5

Figure 1-3

Figure 1-4

Figure 1-5

Figure 1-6