Acer AL2017 installation instructions Electrical safety Installation safety Cleaning safety

Safety

Electrical safety

Installation safety

Cleaning safety

Note: To ensure your safety and prolong the life of the product, read the following safety recommendations carefully before using the product for the first time.

Do not touch the inside of the monitor. Only authorized and qualified technicians should open the LCD monitor case.

Hold the plug (not the power cable) when you connect the plug to the socket. Make sure your hands are dry.

This product should only be operated with the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

This product is equipped with a 3-prong plug, (a plug having a third grounding pin). This plug will only fit into a grounded power outlet. If you are unable to insert the grounded plug into the outlet, contact your electrician to replace your obsolete outlet. Do not use a two-prong adapter instead of the grounded plug.

Don’t expose your LCD monitor to water, or any environment with a high temperature or humidity, such as kitchens or swimming pools. Flower vases filled with water are also dangerous.

If your LCD monitor operates abnormally (i.e., releases smoke, noise or a smell), remove the plug immediately and contact your authorized dealer or service center.

Don't touch your LCD monitor with your fingers or any hard object. Avoid scratching or leaving any oil sludge on the surface of the display.

Protect your LCD monitor by installing it in a place that is well-ventilated, moisture proof, and dust-free.

Don’t install your LCD monitor near a heat source, (i.e., ovens, space heaters, fire places, furnaces or in the sun).

To avoid electric shock, or dropping, install your LCD monitor in a place where children will not touch it. Secure your LCD monitor firmly and explain the safety rules to children, if required.

When installing your LCD monitor or adjusting its angle, attention should be paid to the loading capability and leveling of the structure supporting the LCD monitor.

Don’t spray cleanser or water onto your LCD monitor or its case.

When cleaning your LCD monitor, make sure that no liquid permeates into the inside of the LCD monitor or any accessory.

Moisten a clean, soft, lint-free cloth with water or glass cleaner without alcohol. Squeeze it so it's just a little damp and wipe the surface of your LCD monitor gently. It is recommended to use a silk cloth that is exclusively used to clean the display.

1