Attachments
Plug and play
Power saver
Troubleshooting
The product provides the latest VESA plug and play feature to prevent complicated and
The LCD monitor transfers the Extended Display Identification Data (EDID) to your computer system via the Display Data Channel (DDC), so that your computer can use the
The LCD monitor has a
When the LCD monitor is not operated for a period of time, the Power Control System automatically sets the system at low voltage status to save power. Move the mouse slightly or press any key to return to normal operation.
The Power Saver function can only be operated by the display card of the computer system. You can set up this function from your computer.
The LCD monitor is compatible with EPAENERGY STAR NÜTEK when used with
VESA DPMS.
To save power and extend the life of the product, turn off the LCD monitor power supply when it is idle for a long time or not being used.
Power LED does | Check that the power switch is turned on. |
not light | Make sure the power cable is connected. |
Icon off | Check that the power switch is turned on. |
| |
| Make sure the power cable is connected. |
| Ensure that the signal cable is inserted in the receptacle appropriately. |
| The Power Saver may turn off the monitor automatically during the operation. |
| Make sure the monitor is restored when you press any key from the keyboard. |
Color default | Refer to "Color Temp. Adjustment" to adjust RGB color or select color |
| temperatures. |
Instability or | Remove any electronic equipment in the vicinity that may cause EMI interference. |
ripple | Check the signal cable of the monitor to ensure that none of the pins are bent. |
Image offset or | Press the auto adjustment button to automatically optimize the screen. |
wrong size | Set up the reference position. |
8
