
Disassembling the LED boards
11.Loose the LED boards four screws.
12.Remove two LED boards from the machine.
13.Loose four LCM hinge screws.
14.Then remove LCM module from the machine.
Remove I/O baord and Main Board.
15.Loose the daughter board screw then remove the daughter board from the machine.
16.Disconnect four cables on the M/B as shown.
17.Loose the M/B screw, remove RJ11 connector from the BTCB.
18.Remove M/B from the BTCB..
19.Disconnect LED/B cable and USB/B FFC.
Chapter 3 | 63 |