Acer Aspire 6935G manual No beep Error Messages FRU/Action in Sequence

	Error Messages	FRU/Action in Sequence
	Real time clock error	RTC battery
		Run BIOS Setup Utility to reconfigure system time,
		then reboot system.
		System board
	Previous boot incomplete - Default configuration	Run “Load Default Settings” in BIOS Setup Utility.
	used.	RTC battery
		System board
	Memory size found by POST differed from CMOS.	Run “Load Default Settings” in BIOS Setup Utility.
		DIMM
		System board
	Diskette drive A error	Check the drive is defined with the proper diskette
		type in BIOS Setup Utility.
		See “External Diskette Drive Check” on page 70.
	Incorrect Drive A type - run SETUP	Check the drive is defined with the proper diskette
		type in BIOS Setup Utility.
	System cache error - Cache disabled	System board
	CPU ID	System board
	DMA Test Failed	DIMM
		System board
	Software NMI Failed	DIMM
		System board
	Fail-Safe Timer NMI Failed	DIMM
		System board
	Device Address Conflict	Run “Load Default Settings” in BIOS Setup Utility.
		RTC battery
		System board
	Allocation Error for device	Run “Load Default Settings” in BIOS Setup Utility.
		RTC battery
		System board
	Failing Bits: nnnn	DIMM
		BIOS ROM
		System board
	Fixed Disk n	None
	Invalid System Configuration Data	BIOS ROM
		System board
	I/O device IRQ conflict	Run “Load Default Settings” in BIOS Setup Utility.
		RTC battery
		System board
	Operating system not found	Enter Setup and see if fixed disk and drive A: are
		properly identified.
		Diskette drive
		Hard disk drive
		System board
Error Message List

No beep Error Messages	FRU/Action in Sequence
No beep, power-on indicator turns off and LCD is	Power source (battery pack and power adapter).
blank.	See “Power System Check” on page 71.
	Ensure every connector is connected tightly and
	correctly.
	Reconnect the DIMM
	LED board
	System board

Chapter 4 75