Acer HS244HQ manual Installation, Steps, EN-11

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 HDMI Cable (Only HDMI-Input Model)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the HDMI cable to the computer.

2.Connect the Audio Cable (Only Audio input model)

3.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

4.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

5.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

HD MI	HD MI	VGA
		1-1	1-2	1-2	2
3		VGA	HDMI	H DMI

3 2 1-2 1-2 1-1

EN-11