Set Supervisor Password, Enter Password

Set Supervisor Password

When this function is selected, the following message appears at the center of the screen to assist you in creating a password.

Parameter	Description	Options
Set	When this function is selected, the following message appears at the center of the screen to
Supervisor/User	assist you in creating a password.
Password	ENTER PASSWORD
	Type the password, up to eight characters, and press<Enter>. The password typed now will
	clear any previously entered password from CMOS Memory. You will be asked to confirm the
	password. Type the password again and press <Enter>. You may also press<ESC> to abort
	the selection.
	PASSWORD DISABLED
	To disable password, just press<Enter> when you are prompted to enter password with
	empty. A message will confirm the password being disabled.
	If you have selected “System” in “Security Option” of “BIOS Feature Setup” menu, you will be
	prompted for the password every time the system reboots or any time you try to enter BIOS
	Setup. If you have selected “Setup” at “Security Option” from “BIOS Features Setup” menu,
	you will be prompted for the password only when you enter BIOS Setup.
	Supervisor Password has higher priority than User Password. You can use Supervisor
	Password when booting the system or entering BIOS Setup to modify all settings.