21
Standard CMOS Features Select standard CMOS features from the main menu to configure some basic
parameters in your system the following screen shows the standard CMOS
features menu:
The following table describes the parameters found in this menu.
Parameter Description Options
System Date Set the date following the weekday-month-day-year format.
System Time Set the system time following the hour-minute-second format.
Primary IDE Master/Slave
Secondary IDE Master/Slave
Third IDE Master/Slave
Allows you to configure the hard disk drive connected to the master port of
IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE
CD-ROM is always automatically detected.
IDE BusMaster When enabled, BIOS uses PCI bus-mastering for
reading/writing to IDE drives.
Enabled
Disabled
Drive A The category identifies the types of floppy disk drive A
that has been installed in the computer..
Disabled
720 KB 3.5 inch
1.44 MB 3.5 inch
2.88 MB 3.5 inch
Not Detected