Parameter | Description |
Virus Warning | This feature allows you to enable the VIRUS |
| warning function for IDE Hard Disk boot sector |
| protection. If this function is enabled and there |
| is someone attempts to write data to this area, |
| BIOS will show a warning message on screen |
| and the alarm will beep. |
|
|
Quick Power | This feature allows the system to skip certain |
On Self Test | tests while booting. When this function is |
| enabled, it will decrease the time needed to boot |
| the system, which means to quick power on |
| |
|
|
Silent Boot | This feature allows you to enable or disable if the |
| screen logo to display or not during POST |
|
|
First/Second/ | The item allows you to see the sequence of boot |
Third Boot | device where BIOS attempts to load the disk |
Device | operation system. |
Boot From | This item allows user to enable or disable to boot |
Other Devices | from other device |
|
|
Boot Up | This item allows user to enable or disable to set |
NumLock | keyboard is number keys or arrow keys |
Status |
|
|
|
Security | This category allows you to limit access to the |
Option | system and Setup, or just to Setup. |
|
|
APIC Mode | This option is used to set up enable or disable |
| the APCI function |
|
|
HDD | S.M.A.R.T. which allows your hard disk to report |
S.M.A.R.T | any read/write errors and issue a warning when |
Capability | LDCM installed |
Options
[Enabled], [Disabled]
[Enabled], [Disabled]
[Enabled], [Disabled]
[Floppy], [LS120], [Hard Disk],
[Enabled], [Disabled]
[System], [Setup]
[Enabled], [Disabled]
[Enabled], [Disabled]
28
