The following table describes the parameters found in this menu.
Parameter | Description | Options |
ACPI Function | This item allows you to enable or disable | [Enabled], [Disabled] |
| the ACPI function |
|
|
|
|
ACPI Suspend | This item specifies the power saving modes | [S1 (POS)]: Set ACPI |
Type | for ACPI function. S1 (POSP: The S1 sleep | suspend |
| mode is a low power state.. In this state, no | type to |
| system context (SPU or chipset) is lost and | S1/POS |
| hardware maintains all system context/ S3 | (Power On |
| (STR): The S3 sleep mode is s | Suspend). |
| state in which power is supplied only to | [S3 (STR)]: Set ACPI |
| essential components such as main | suspend |
| memory and | type to |
| system context is saved to main memory. | S3/STR |
| The information stored in memory will be |
|
| used to restore the PC to the previous state |
|
| when an |
|
|
|
|
HDD Power | The setting controls how long a hard disk | [Disabled], [Standby], |
Down | drive must be left idle before it spins | [Suspend] |
| downs. |
|
|
|
|
HDD Down In | Enables or Disables the functionality of | [Enabled], [Disabled] |
Suspend | HDD down in suspend |
|
|
|
|
39
