Acer S5201, N216, T121E User Password, Administrator Password, Lock User Startup Screen, Devices

English

28

User Password

•Press to set up or change "User Password".

•Use the numerical keys on the remote control to set the password and press "MENU" to confirm.

•To delete the digits, Press .

•Enter the password again when you see "Confirm Password" displayed.

•The password should be 4~8 digits in length.

•If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.

•If you select "Always request password while projector turns on", you are requested to input the password every time the projector is turned on.

Administrator Password

You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box is displayed.

•Press to change "Administrator Password".

•The factory default of "Administrator Password" is

"1234".

If you forget your administrator password, do the following to retrieve the administrator password:

•Enter the unique 6-digit "Universal Password" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is.

•If the Security Card is lost, please contact your local Acer

service center.

Lock User Startup Screen

•The default value is "Off". If it is "On", you cannot change the startup screen arbitrarily.

	Selecting "On" enables the function. The projector can output
	a VGA signal when it is in standby mode and the VGA IN (or
	VGA IN 1) and VGA OUT sockets are correctly connected to the
VGA OUT	devices.
	Enabling this function slightly increases the standby
	power consumption.