65
Onchip Legacy
Audio
This item is used to enable or disable
the onboard legacy audio.
If enabled, the following parameters
can be selected:
SB I/O Base
SB IRQ Select
SB,DMA Select
MPU-401 I/O Address
Disabled
Enabled
220H, 240H,
260H, and 280H
IRQ5, IRQ7,
IRQ9, and IRQ10
DMA1, DMA0,
DMA2, and
DMA3
330-333, 300-
303, 310-313,
and 320-323H
Onboard FDD
Controller
Setting this parameter to Enabled
allows you to connect your floppy
disk drives to the onboard floppy
disk connector instead of a separate
controller card. Change the setting
to Disabled if you want to use a
separate controller card.
Enabled
Disabled
Onboard Serial
Port 1
This item allows you to assign an
address and interrupt for the board
serial port.
3F8/IRQ4
Auto
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard Serial
Port 2
This item allows you to assign an
address and interrupt for the board
serial port.
2F8/IRQ3
Auto
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Disabled
Parameter Description Options
Ap8400-e.book Page 65 Friday, October 1, 1999 2:20 PM