35
Wake-on LAN Function
This system board implements a WOL connector. To use the
LAN Wake-up function, you need to install a network card that
supports this feature. In addition, you also need to install a
network management software such as ADM (Advanced
Desktop Manager). This feature allows the system to be
activated via network access. Common network functions
such as remote access, file sharing, etc. are also supported.
Refer to “Jumpers and Connectors” on page 27 for the location
of the WOL connector on the system board.
Ap8400-e.book Page 35 Friday, October 1, 1999 2:20 PM