CONTROL PANEL FUNCTION - ERROR DISPLAY 1-4
IF THE HEATER STOPS WORKING ONE OF THE FOUR ERRORS WILL BE DISPLAYED THE FAILURE LIGHT WILL BE ON AND THE RELEVANT CODE WILL START TO FLASH
E1: the water temperature sensor is not working correctly.
E2 : the tube sensor is not working correctly. Please contact your dealer.
E3 : Pool filtration is running but water flow is not sensed. ‘Flow Switch’ may not be working properly or there is a lack of water flow. Backwash filter and check suction lines (Skimmer(s) & Main Drain(s) for obstruction.
PLEASE ALSO SEE PAGE 15 - FILTRATION & FAQ
E4 : Indicates high water/refrigerant pressure. High limit pressure switch has activated and turned off power supply.
14