Installation7
To install the monitor on your host system, please follow the steps below:
Steps
1Connect the video cable
a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer.
c Connect the digital cable (only for
(1)Make sure both the monitor and computer are switched off.
(2)Connect one end of the
dConnect the digital cable (only for DP models).
(1)Make sure both the monitor and computer are switched off.
(2)Connect one end of the
2Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
4Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important.
5If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem.
English
Audio cable
VGA cable
DVI cable
D3 cable