Acer X1230S manual Management, Administrator Password, Reset, ECO Mode

VGA OUT (Standby)

23

Administrator Password

You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays.

•Press to change "Administrator Password".

•The factory default of "Administrator Password" is

"1234".

If you forget your administrator password, do the following to retrieve the administrator password:

•Enter the unique 6-digit "Universal Password" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is.

•If the Security Card is lost, please contact your local Acer service center.

Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN and VGA OUT sockets are correctly connected to the devices.

Enabling this function slightly increases the standby power consumption.

English

Reset Press after choosing "Yes" to return the display

parameters on all menus to the factory default settings.

Management

ECO Mode

Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode.