Optional Citrus Juicer Attachment
An optional Citrus Juicer Attachment catalog #8001 is available to enable you to easily juice citrus fruits with your Acme Supreme Juicerator®.
•Before using the Citrus Juicer Attachment, remove cover, clutch,
cutter blade, and strainer basket from the Juicerator®. These parts are not used with the Citrus Juicer Attachment.
•Following Figure 4, place Citrus Juicer Attachment on Juicerator® bowl with drain spout to the left of center front, and turn the attachment counterclockwise to secure beneath spring clips. Be sure that the cone/strainer is firmly seated in the Citrus JuicerAttachment.
•Turn on Juicerator® switch, and allow a few seconds for motor to reach normal speed before juicing.
•Cut citrus fruit in half crosswise. Place fruit, cut side down, on the cone/strainer and push down firmly. Cone/strainerwill not turn until pressure is applied. Cone/strainer will stop turning when pressure is released. Caution: Keep fingers away from moving parts.
•For cleaning, turn the attachment clockwise to release from spring clips. Remove the attachment, take cone/strainer out, and place both bottom side up under running water, or place on the top rack of dishwasher.
•After removing the attachment, remove the juice bowl and rinse with cool water, or place on the top rack of dishwasher.
Figure 4
9
