Important: Acme Supreme Juicerator® should be unplugged from outlet when disassembling and assembling.
Disassembling
•After removing your new Juicerator® from the box, you may want to familiarize yourself with the parts by disassembling the unit and washing the top parts. (See Figure 1)
•With Juicerator® facing you (spout front), put your hands on both sides of the cover. Using the side arms for leverage, push back with your left hand and pull forward with your right turning the cover clockwise. This will disengage
the cover from the spring clips and allow disengage the lid safety interlock.
•Look into Juicerator® and remove clutch by unscrewing counterclockwise.
•Lift out cutter blade.
•Lift out strainer basket.
•Lift off juice bowl.
Assembling
Figure 1
•Place bowl on motor base housing and place the spout facing front between the two raised projections on the motor base housing.
•Place strainer basket inside the bowl over the hex nut. Be certain the strainer basket sits flat.
•Place cutter blade inside strainer basket with teeth up.
•Tighten clutch by hand until tight or snug.
•If using disposable filter, insert it flat against the holes around the inside of the strainer basket. Once the Juicerator® is running, centrifugal force will push the filter into perfect position.
•Place cover on juice bowl with feed chute at the right rear, grip the sides of the lid firmly and turn counterclockwise to engage the spring clips and the safety interlock.
3
