![AEGOp5 Decoder](/images/new-backgrounds/25361/253619x1.webp)
AEGOp5 Decoder
AEGOp5 Remote Control
| Front | Rear |
AEGOP5 | Left | Left |
Centre | Sub | |
| Front | Rear |
| Right | Right |
|
|
|
|
|
|
|
| AEGOp5 Front Panel |
| ||
1. The POWER Button |
| 2. LCD Display | 3. Speaker Channel LEDs |
|
|
|
| ||||
Turns AEGOP5 on or off. |
| Provides you with | Each LED represents the status of an individual channel. When | ||
|
| information regarding the | a particular channel is active, the LED lights up. | ||
|
| system status and settings. | The colour of the LED also indicates the frequency range of | ||
|
|
| that channel: |
* Red means this particular channel has been set to output a wider frequency range that contains bass signal between 20Hz to 120Hz.
* Green means this particular channel doesn’t contain the bass signal between 20Hz to 120Hz.
9 6
input |
| power |
2 |
| 1 |
mute |
| test |
4 |
| 3 |
balance | delay | prologic |
7 |
| 5 |
field | EQ on/off EQ setup | |
10 |
| 8 |
preset 1 | preset 2 | preset 3 |
|
| 11 |
save1 | preset 4 | load |
12 |
| 13 |
BassManager | Cen | |
15 |
| 14 |
SL/SR |
| SW |
DRC | VOL | D Time |
|
|
18
reset
1 POWER Button
On/off key
2 INPUT MODE Button
Select from the 5 different source inputs
3 TEST Button
Test signal for the 6 discrete channels
4 MUTE Button
Mute the sound (toggle on and off)
5 PRO LOGIC Button
Select from 4 different surround settings
6 DELAY Button
Select the desired channel to engage the time delay adjustment
7 BALANCE Button
Set the volume setting for each of the 6 channels
8 EQ SETUP Button
Select up to 5 EQ Band Settings
9 EQ ON/OFF Button
Activate the selected EQ Band Setting
10 FIELD Button
Select from 6 different sound fields
11 PRESET Button (P1, P2, P3, P4)
Recall up to 4 different presets
| Front | Rear |
|
|
|
|
|
|
|
| Left | Left | Centre |
|
|
|
|
|
|
ACOUSTIC ENERGY LIMITED, |
|
|
|
|
| Left |
|
|
|
16 BRIDGE ROAD, CIRENCESTER, |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
GLOUCESTERSHIRE GL7 1NJ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Right |
|
|
|
| Front | Rear | Sub | AUX 2 | AUX 1 | LINE IN | OPTICAL | DIGITAL | POWER |
MULTIPIN | Right | Right |
| Developed And Manufactured By Videologic Systems. | IN | IN | 12V DC | ||
|
|
|
|
|
|
|
AEGOp5 Rear Panel
1. MULTIPIN Audio Output:
This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.
2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):
The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.
3. AUX1 AUX2 and LINE Inputs:
These inputs accept signals from stereo analog signal sources.
4. OPTICAL and DIGITAL inputs:
Your AEGOP5 has two types of digital inputs. One S/PDIF (OPTICAL) and one coaxial (DIGITAL) input. Connect the digital outputs of the sound sources to these inputs.
5. 12V DC Power Input:
Connect the AEGOP5 power adapter to an AC outlet. Please refer to page 6 to determine the correct voltage in your area.
19
17
16
12 SAVE Button
Store your settings into a selected preset
13 LOAD Button
Activate your saved setting stored in selected preset
14 SPEAKER ON/OFF Buttons (CEN, SL/SR, SW)
CEN Button activates/deactivates the centre channel speaker.
LS/RS Button simultaneously activates/deactivates the left and right rear speakers.
SW Button activates/deactivates the subwoofer.
15 BASS MANAGER Button
Switches between three bass configurations (bass config.1, bass config.2 and bass config.3)
16 VOL + and VOL -
Increase/decrease the volume.
17 D TIME Button
Increase/decrease the delay time.
18 DRC Button
Select among 3 different dynamic range compression ratios.
19 RESET Button
Resets the system to its factory default settings.
8 |
| 9 |
|
|
|