AEGOp5 Operation
AEGOp5 Operation
Press the EQ SETUP button to display the current
AEGOp5 Operation - Saving Presets
AEGOp5 Operation
- Sound Field Processing
setting of EQ Band 1.
DOLBY DIGITAL CO
AEGOp5 Operation - Resetting
Setting Presets
The AEGOP5 enables you to customise up to 4 settings. This function enables you to save and load your favourite settings at any time.
Saving a Preset:
Press the PRESET 1 button, the display will show the following:
input |
| power |
mute |
| test |
balance | delay | prologic |
field | EQ on/off | EQ setup |
preset 1 | preset 2 | preset 3 |
save1 | preset 4 | load |
DSP Sound Field
Your AEGOP5 is equipped with a sound field processor that gives you six different field effects; Disable, Hall, Theater, Stadium, Club, and Church. By pressing Field button on the remote, you can select any of these effects. You can also increase or decrease the Reverb value from 0 - 9 by pressing
input |
| power |
mute |
| test |
balance | delay | prologic |
field | EQ on/off | EQ setup |
preset 1 | preset 2 | preset 3 |
save1 | preset 4 | load |
EQ BAND 1 | 0DB |
Press the EQ SETUP button again to select next EQ Band.
DOLBY DIGITAL CO
EQ BAND 2 | 0DB |
Press the Vol+ or Vol- button to increase or decrease the volume for current EQ Band.
DOLBY DIGITAL CO
Resetting | save1 preset 4 | load | |
Your AEGOP5 can be reset to its factory | BassManager | Cen | |
default settings by pressing RESET button | |||
SL/SR | SW | ||
on the remote. | |||
VOL | D Time | ||
| |||
| DRC |
| |
| reset |
|
Press the RESET button to reset the
AEGOP5 to its factory default settings.
DOLBY DIGITAL CO PRESET 1
BassManager Cen
SL/SRSW
VOL + or VOL - on the remote control whilst you are selecting the field effect.
BassManager | Cen |
SL/SR | SW |
EQ BAND 2 +01DB
Press EQ SETUP button to store the new EQ setting.
DOLBY DIGITAL CO RESET TO FACTORY
Press the SAVE button to save all the current decoder settings into Preset 1.
DOLBY DIGITAL CO PRESET 1 SAVING
DOLBY DIGITAL CO PRESET 1 SAVED
VOL | D Time |
DRC
VOL | D Time |
Press the Field button and repeat to
change the current setting of Sound Field mode.
DOLBY DIGITAL CO
DIABLE REVERB 0
DOLBY | DIGITAL CO |
HALL | REVERB 3 |
Press EQ ON/OFF button to switch the new EQ settings on or off.
AEGOp5 Operation - DRC (Dynamic Range Compression)
When completed, your AEGOP5 reverts to Auto Decode mode.
DOLBY DIGITAL CO SURROUND
When complete, your AEGOP5 will revert back to Auto Decode mode.
DOLBY DIGITAL CO
AEGOp5 Operation |
|
|
| |
- Loading Preset |
|
|
| |
Loading a Preset |
|
|
| |
You can load a previously saved preset |
|
|
| |
by pressing LOAD button on the | input |
| power | |
|
|
| ||
remote. | mute |
| test | |
| balance | delay | prologic | |
Loading a Preset: | field | EQ on/off EQ setup | ||
Press any of the 4 preset buttons, | ||||
|
|
| ||
(PRESET 1, PRESET 2, PRESET 3 or | preset 1 | preset 2 | preset 3 | |
|
|
|
DOLBY DIGITAL CO THEATRE REVERB 3
DOLBY DIGITAL CO STADIUM REVERB 3
DOLBY | DIGITAL CO |
CLUB | REVERB 3 |
DOLBY DIGITAL CO CHURCH REVERB 3
AEGOp5 Operation - Equalization
DRC
Your AEGOP5 features Dynamic Range Compression (DRC), its sophisticated technology creates realistic sound fields with richly detailed sound that is remarkably free from distortion. Repeatedly pressing DRC button will switch between 3 modes:
“NO” No compression is applied to the original audio signal, this provides the greatest dynamic range.
“HALF” Partial compression is applied, this function is useful if AEGOP5 is connected to an external amplifier.
input |
| power |
mute |
| test |
balance | delay | prologic |
field | EQ on/off | EQ setup |
preset 1 | preset 2 | preset 3 |
save1 | preset 4 | load |
BassManager | Cen | |
SL/SR |
| SW |
DRC | VOL | D Time |
|
|
reset
PRESET 4), the display will show | save1 | preset 4 | load | |
|
|
| ||
the following: |
| BassManager | Cen | |
|
| |||
DOLBY | DIGITAL CO | SL/SR |
| SW |
PRESET | 1 | DRC | VOL | D Time |
Press LOAD button to load the preset.
DOLBY DIGITAL CO
PRESET 1 LOADING
DOLBY DIGITAL CO
PRESET 1 LOADED
Your AEGOP5 features a
Each band of the equalizer enables you to adjust your desired volume to a maximum of ±10dB. Press VOL + or VOL - on the remote control to adjust the volume.
input |
| power |
mute |
| test |
balance | delay | prologic |
field | EQ on/off | EQ setup |
preset 1 | preset 2 | preset 3 |
save1 | preset 4 | load |
BassManager | Cen | |
SL/SR |
| SW |
“FULL” Full compression is applied, this function is useful if AEGOP5 is connected to an external amplifier.
Press the DRC button to display the current setting of Dynamic Range Compression mode.
DOLBY DIGITAL CO
DYNAMIC NO
Press the DRC button again to switch between the DRC modes.
DOLBY DIGITAL CO
DYNAMIC FULL
When preset loading is complete, your AEGOP5 will revert back to Auto Decode mode.
DOLBY DIGITAL CO
VOL | D Time |
| DRC |
After setting the desired volume for each | reset |
EQ band, you |
|
press EQ SETUP button again to store the new setting for that band.
Press EQ ON/OFF button to switch the new EQ settings on or off.
DOLBY DIGITAL CO
DYNAMIC HALF
14 | 15 |