Acoustic Research AR4200 manual Adjustment in YPbPr Mode, Adjusting Image width and height

Adjustment in YPbPr Mode

Changing the Scaling mode of Image

1

2

3

4

Press MENU to display the m e n u m a i n p a g e .

Press VOL+/- to display window menu page.

Press CH￿to select image size item.

Press VOL+/- to select fill all or Normal.

window
image size		fill all
h position		50
v position		50
freeze window	off	on
digital pan and zoom
h wide		50
v high		50
right/left to change image size

5 Press MENU to exit.

Fill All---this mode stretches the input vertically and horizontally to fill the full screen. This mode is the default mode.

Normal---this mode displays the incoming picture with normal ratio.

Changing the Position of Image

After connecting the unit to your device, adjust the position of the screen if it is not well-aligned.

1 Press MENU to display the menu main

2 Press VOL+/- to display window menu page.

3 Press CH￿/￿to select h position or v position item.

4 Press VOL+/- to adjust the value of the item until the screen is well-aligned.

5 Press MENU to exit.

window
image size		fill all
h position		50
v position		50
freeze window	off	on
digital pan and zoom
h wide		50
v high		50
right/left to adjust h position

Adjusting Image width and height

1 Press Menu to display the menu main

2 Press VOL+/- to display window menu page.

3 Press CH￿/￿to select h wide or v high item.

4 Press VOL+/- to adjust the value of the item.

5 Press Menu to exit.

window
image size		fill all
h position		50
v position		50
freeze window	off	on
digital pan and zoom
h wide		50
v high		50
right/left to adjust h wide

36