6. Set up the radio
Refer to Using the menus on page
A.NOTE: When you turn on the radio for the first time, it will be in "DEMO" mode. To exit this mode, press and release preset 1, then SLEEP/SNOOZE, then preset 6 on top of the radio.
B.After exiting the DEMO mode, the radio displays the Select Language screen. Press or to choose your language and then press
SELECT.
D.Wired
This method uses an Ethernet cable shown in step 4 on page 9 to wire the radio directly up to your broadband modem, router, hub, or switch. Make sure your Ethernet cable is properly connected.
•At the Network Setup screen, press or to select Wired and then press SELECT.
•Before the connection is complete, the radio may take some time to check for updates and retrieve account info from the server. Please wait until you hear a short congratulations message and "Setup is complete, enjoy the music" is displayed.
•If the radio requires your IP address, you can find this information on your broadband modem, router or access point’s administration setup page or manual.
C.The Network Setup screen displays connection options:
•Select Wired to connect using an Ethernet cable. Go to step D to complete the connection.
•Select Wireless to connect using an existing
E.Wireless
This method uses your existing
You need to know your Wireless Network’s name (SSID) and if your wireless network has security enabled, you will also need to know your wireless network password (sometimes called passphrase or key). You can find this information on your broadband modem, router or access point’s administration setup page or manual. You may also call your Internet Service Provider (ISP) if you do not know how to access the administration page in order to find this information. They usually have a
•Wireless network name (SSID)
•Security Type (Only needed if your network has security enabled and your SSID is hidden, not broadcasted)
•Password/Key (Only needed if your network has security enabled)
10