•At the Network Setup screen, press 
or 
to select Wireless and then press SELECT. The Network Setup screen then shows with three setup options. Press 
or 
to choose an option and then press SELECT.
•Detect Networks: to automatically scan for available networks and display a list of networks to choose from. Go to step F to complete the connection.
•Use WPS: to enter WPS pairing mode. Go to step G to complete the connection.
•Enter network SSID: to manually enter your network information. Select this option if your Network SSID is hidden. Go to step H to complete the connection.
F.If Detect Networks is selected, the SSID (network name) of those found will be displayed after searching. Press 
or 
to select a desired network and then press
SELECT.
Then go to step H to complete your
connection.EN
•Interference may sometimes block your network from showing up in the list. If this happens, press 
to show Refresh List and then press SELECT to try again.
G.If Use WPS is selected, you can select from Push Button Mode or PIN Mode.
•If Push Button Mode is selected, the unit will remind you to press the WPS button on your router. The open WPS device of those found will be displayed after searching. Some routers may timeout the connection in one minute, you may repeat the process again if the connection fail.
•Signal strength is indicated by 
.
•Secured network is indicated by 
(unsecured network has none, as Network 1 in the above example).
•If a secured network is selected, you will be required to enter your password in the Network Security screen. The radio should then connect to the Internet. Please wait until you hear a short congratulations message "Setup Complete! Enjoy the music."
and the clock screen is displayed.
•If PIN Mode is selected, the Network Setup screen will be displayed and the PIN which required to be entered into the WPS router's settings is shown.
•If the unit is successfully paired up with open WPS router, the radio should then be connected to the Internet. Please wait until you hear a short congratulations message and the clock screen is displayed.
•If the network SSID is hidden (not broadcasted), you will only see a padlock icon and signal strength bars like the 4th network shown above. Press 
to highlight Enter SSID on the display and then press SELECT.
11
