Speaker Power | Left/Mono/Right |
Input Jack | Slide Switch |
Speaker Back View
3.Set up each speaker for mono or stereo operation.
a)Monaural operation: The monaural mode (MONO) is recommended when using single speakers separately. For monaural operation, set the L/MONO/R switch to “MONO” on each speaker.
b)Stereo operation: Set the L/MONO/R switch to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position.
Notes:
Each speaker automatically retunes if it loses the transmitter’s signal. You can also press the Power/ Volume/Scan button on the front of the speaker to retune the speaker at any time.
The transmitter turns off automatically if there is no audio signal present for a prolonged period.
Interference in the form of static and/or distortion can sometimes be heard. If this occurs, confirm the transmitter/speaker adjustments and indicators. If the problem persists, refer to the Troubleshooting section of this manual.
Turning the Speakers Off
1.Press and hold the Power/Volume / Scan control to turn the speaker off.
2.Confirm that the speaker is off by verifying that the STDBY./TUNED indicator is no longer illuminated.
The speaker will automatically charge rechargeable batteries (NiMH or NiCd only) when the batteries are installed and the speaker is plugged in with the AC power adapter. The CHRG. indicator on the front of the speaker will illuminate.
Warning: DO NOT power the speaker with the AC power adapter if you installed alkaline or other
