ACR Electronics RCL-300A, 1933 manual

Press the Up or Down arrows to raise or lower the searchlight beam.

To activate the XRCiZ™ feature, press and hold the ON/OFF button for more than 5 seconds. The green LED ind9cates that the XRCiZ™ feature is enabled.

To deactivate the XRCiZ™ feature, press and hold the ON/OFF button for more than 5 seconds. The red LED ind9cates that the XRCiZ™ feature is disabled.

An LED blinking red/green indicates that then XRCiZ™ feature is now “exercising” the searchlight.

To activate the Self-Park feature, press and hold the Point Pad™ Speed button for more than 5 seconds.

While the Self-Park feature is operating the searchlight, pressing any Point Pad™ button will stop the park command and leave the searchlight to follow any additional commands.

To deactivate the Self-Park feature, press and hold the Point Pad™ Speed button for more than 5 seconds.

An LED blinking re/green indicates that the searchlight is seeking its Self-Park position.

The Self-Park and XRCiZ™ features are normally disabled when power is lost to the URC-300 Master Controller and will have to be reactivated.

NOTE: Self-Park and the XRCiZ™ features are only available when paired with a URC-300 Master Controller.

Figure 6

Y1-03-0232D 10