The ARX-50 has three large, circular push buttons and seven LEDs that indicate settings. The push buttons switch between alternate modes. Each button is assigned a set of functions. See Figure 1. Each button “beeps” when depressed. The LED indicators are either red or green to signify the system mode. Green LEDs signify that the system is in a normal state and red LEDs signify that the system is in an atypical state.

Turn on the ARX-50

The red OFF LED will be illuminated while the system is turned off, yet is still connected to a power supply. To turn on the ARX-50, depress the On/Off button. The LEDs will blink on and off, and the green On LED will illuminate. Set to default at the factory, the alarm mode is active on channel

121.5MHz. Some signal level indicators may flicker while the unit searches for a signal.

Choose Alarm mode or Monitor mode

Alarm mode

The Alarm mode for the ARX-50 is the system’s default mode. In this mode, the radio beacon signal detector circuitry is activated, i.e., The system is ready to detect 121.5 MHz signals.

In Alarm mode, the speaker is silenced until a 121.5 MHz beacon signal is detected, at which time a loud audible siren and a flashing bright red LED are activated.

The ARX-50 detects an activated Mini B™300 beacon, and other activated beacons that transmit 121.5 MHz signals.

The ARX-50 is designed to only detect an alarm on 121.5 MHz signals that originate from an activated beacon.

The signal strength meter is always active in this mode. If there is a strong signal that is not from a beacon, the signal strength will still be displayed on the signal strength meter, but the ARX-50 will not alarm.

Monitor High mode

This mode is intended for advanced users to obtain more information about a received signal.

NOTE: The ARX-50 reverts back to Alarm mode after 15 minutes in Monitor High mode.

In the monitor modes, the ARX-50 detector circuitry is deactivated. The demodulated 121.5 MHz audio signal is annunciated at all times. If there is not any signal on the 121.5 MHz carrier, whether activated beacon or other source, static will be audible. The speaker volume is high, and the signal strength meter is active.

Y1-03-0229C

7

Page 8
Image 8
ACR Electronics Y1-03-0229C manual Turn on the ARX-50, Choose Alarm mode or Monitor mode

Y1-03-0229C, ARX-50 specifications

The ACR Electronics ARX-50, model Y1-03-0229C, is a state-of-the-art device designed for emergency safety and communication, particularly in marine and other outdoor environments. As an essential tool for adventurers, sailors, and professionals working in remote locations, the ARX-50 ensures reliable connectivity and safety in critical situations.

One of the standout features of the ARX-50 is its Compact Emergency Position Indicating Radio Beacon (EPIRB) functionality. This beacon operates on 406 MHz frequency, which is the global standard for distress signals. When activated, it transmits location data to search and rescue satellites, allowing for swift response times in emergencies. With precise GPS positioning integrated into the device, users can count on accurate location transmission, enhancing rescue capabilities.

The ARX-50 is built to withstand harsh marine conditions. Its rugged design meets stringent waterproof standards, ensuring reliable performance even in adverse weather. The device is also lightweight and compact, making it easy to carry without adding significant bulk to emergency kits or life vests.

In terms of battery life, the ARX-50 is equipped with an extended battery capacity that ensures longevity during critical operations. The device can broadcast a distress signal for an extended period, maximizing chances of rescue. Additionally, the ARX-50’s battery can be easily replaced, which is a crucial feature for maintaining operational readiness.

Another notable technology integrated into the ARX-50 is the user-friendly interface. The device features simple controls, allowing quick activation during emergencies. The clear LED indicators provide visual cues about the operation status and battery life, ensuring users are always informed. Moreover, the lightweight construction does not compromise the robustness required for emergency equipment.

The ARX-50 also incorporates advanced features such as an integrated strobe light that enhances visibility during night operations, further assisting rescue teams in locating individuals in distress. The versatility in applications—ranging from marine use to outdoor activities—adds to its appeal, making it a valuable tool for anyone venturing into remote areas.

In summary, the ACR Electronics ARX-50, Y1-03-0229C, is a highly reliable and efficient emergency communication device. With its combination of rugged design, enhanced GPS technology, user-friendly features, and robust emergency signaling capabilities, it represents a vital tool for safety-minded individuals navigating remote terrains or working in challenging environments.