2.What country should I register in?
Register your beacon with the EPIRB national authority of the country for which the beacon was programmed, typically the country where purchased, regardless of where you do your boating.
The beacon must be reprogrammed if you, as the owner, move or the vessel sails under the flag of a different country than the one for which the beacon was previously programmed. To verify the country for which a beacon is programmed, see the label with the UIN (Unique Identification Number) on the back of the unit. Units that do not have a country specified on the UIN label are programmed for the United States.
3.How do I register?
Registration in the United States
The national authority that accepts registrations in the United States is the National Oceanic and Atmospheric Administration (NOAA).
Here are three ways to register:
1.The fastest and easiest way to register is online at www.beaconregistration.noaa.gov/.
2.Faxing a registration is also acceptable. Fax the registration form to the fax number on the top of the registration form.
NOTE: Do not confuse the registration form with the ACR Electronics warranty card.
3.If online or fax registration is not available, mail the registration form with the
NOAA SARSAT Beacon Registration
NSOF, E/SP3
4231 Suitland Road
Suitland, MD 20746
All registration forms will be entered in the 406 MHz beacon registration database within 48 hours of receipt. The information you provide on the registration form is used for rescue purposes only.
Aconfirmation letter, a copy of the actual registration and a
4 |