The instructions that follow in this chapter parallel the steps contained in the
Actiontec Connection 1-2-3®setup utility, which provides a visual, step-by-step guide to setting up the USB Adapter. It is recommended the user run Connection 1-2-3first, before attempting any other procedures.
MCaution: Do not plug in the Adapter until instructed during the installation procedure.
1.Insert the Installation CD in the CD-ROMdrive of the computer. Connection 1-2-3starts automatically. Temporary files and drivers for the Adapter are loaded onto the hard drive, then the first Connection 1-2-3screen appears. Read the onscreen instructions, then click Next.
☞Note: If Connection 1-2-3does not start automatically, click Start from the desktop, then select Run. Type d:\c123.exe (with “d” representing the drive letter of the computer’s CD- ROM drive) in the “Open” text box, and click OK.