ACTiSYS Corp. | IR Printer Adapter IR100M+/100M/100MP |
IR100M/IR100M+
IR Head
30°
|
| Maximum | ||
IR Port | ||||
| 100cm | |||
|
| |||
| 30° |
|
| |
|
|
| ||
|
|
|
| |
Figure 6. Align Diagram
Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function)
1.Turn Off both your computer and printer.
2.Connect
3.Connect your printer and
4.Connect your
5.Plug the AC adapter to the electrical outlet if external power supply need.
6.Plug the AC adapter to IR100M+/IR100M. The red LED on IR100M will be on, but the LED on IR100MB is still off.
7.Turn on your printer.
8.Add a new printer on Printers, set the Local Printer/LPT1 and choose proper printer driver (if you use pass through). For details, see Windows Printer Setting.
9.Print by Windows application’s Print (pass through). The parallel LED on the top of IR100M will flash. If not, see Troubleshooting.
10.Turn on your mobile device.
11.Activate the infrared if necessary. For details, see mobile device manual.
12.Install proper printing software. We recommend ACTiPrintCE if your mobile device’s OS is Windows CE 3.0 or above or ACTiPrintPalm if your mobile device’s OS is Palm OS 3.2 or above. If your mobile device is a PC with Windows 95/98/ME/2000/XP, you can use the application’s print function. For details about how to install the printing software, see specific application manual.
13.Set your printer setting. Set port/Infrared or virtual infrared port LPT3 and choose proper printer driver. Different mobile devices or printing software have different methods. For detail, see the printing software manual or Windows Printer Setting (Windows 95/98/Me/2000/XP device).
Release 3.2, December | 9, 2003 | 11 |
© Copyright ACTiSYS Corporation |
| |