6
5. Press ZERO/MODE to see the combined weight of the two items.
6. Press ZERO/MODE again to reset the display to 0.
7. Repeat these steps until all items have been added.
Note: Adhere to the maximum weight capacity of the scale.
Minus FunctionIf you add multiple items to the scale at one time to get a total weight, you can
identify the value of a single item or ingredient by using the Minus Function:
1. Add item(s) to the scale; display shows total weight.
2. Press ZERO/ON/OFF to reset display to 0.
3. Remove an item.
4. Display shows the weight of the removed item with the Minus Function
indicator (negative value is shown on the display).
5. Remove both items to see the combined weight of the two items.
6. Repeat steps as needed.
Warning MessagesReplace battery (see page 4).
Maximum capacity has been exceeded. Remove
items to prevent damage.
Power the Unit ON/OFFThe scale will automatically power off when the display shows 0 or the same
weight for 2 minutes. Press ZERO/ON/OFF to power the scale on. To power
off manually, press ZERO/ON/OFF when the LCD is showing 0, or press and
hold ZERO/ON/OFF for 3 seconds if a weight is shown on the display.
StorageThe scale can stored on a level surface or can be hung by using the integrated
hang hole.