OPERATION
Using the Alarm Clock
Set the Alarm Time
To set alarm time, press and hold the “ALARM SET” button for 3 seconds to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “+” or
To save your adjustments, press and release the “ALARM SET“ button to adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note PM Indicator light)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 30 seconds. Enter ALARM SET MODE by pressing and holding the “ALARM SET” button for 3 seconds.
Alarm Clock ON or OFF Function
To turn alarm on: Slide the “ALARM ON/OFF” switch to ON. The ALARM ON indicator appears on the screen.
To turn alarm off: Slide the “ALARM ON/OFF” switch to OFF. The ALARM ON indicator disappears from the screen.
Alarm Clock SNOOZE Function
The alarm will sound for 60 minutes before turning off when no button is pressed. When the alarm is sounding, activate the 8 minute SNOOZE function by pressing the SNOOZE button at the top of the alarm clock. SNOOZE function can be activated up to 10 times before the alarm will no longer sound.
Troubleshooting
Clock is too dark,
hard to read or
doesn’t work
•Reset the unit by pressing the RESET button located on the bottom of the clock. This will reset the alarm to the original factory settings. Time and date will need to be entered after a reset.
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877)
5
