Features & Benefits

1.Rainfall Collector Funnel

2.Solar Cell Panel

Converts sunlight into power to run internal aspirating fan.

Draws ambient air into

sensor to reduce solar radiation heating, resulting in more accurate temperature measurement.

3.A-B-C Switch

ID code that must match display’s A-B-C switch to ensure units synchronize.

4.Battery Compartment

3 4 5

5.Temperature & Humidity Sensors (internal)

6.Mounting Bracket

7.Wind Speed Anemometer

8.Wind Direction Vane

9.Mounting Bracket

10.Mounting Hardware

Includes anchors and screws.

11.Debris Filter

Snaps into rain collector to filter out twigs, leaves, etc.

Image 3

Contents

Professional Weather Center Unpacking Instructions Package Contents Features & Benefits Display Programmable Alarm Setting Alarm On/Off Button Wind Speed Alarm On Indicator Average Wind SpeedStorm Alert Alarm On Indicator Weather Select Clock Outdoor Sensor Signal Strength Alarm On/Off Indicator Back of Display Unit Remove Rain Gauge Stabilizer In-1 Sensor SetupSet the A-B-C Switch Install or Replace Batteries Display Unit Setup Plug-in Power AdapterInstall or Replace Backup Batteries optional Set the Time & Date Set the TimeSet the Date Select Measurement Units In-1 Sensor Placement Placement for Maximum AccuracyImportant Placement Guidelines Display Unit Placement Clear Data Collected During Installation In-1 Sensor Installation GuidelinesBasic Setup is Complete In-1 Sensor Installation Barometric Pressure Using the Professional Weather Center Learning ModeProgrammable Weather Alarms Weather Forecast Silence a Sounding Alarm Set a Weather Alarm Inaccurate forecast TroubleshootingProblem Possible Solution Reception Temperature or In-1 Sensor Care Care & MaintenanceCalibration Calibrate Temperature & Humidity Display Unit Care Tips Calibrate the Rain Gauge FCC Information Specifications Customer Support Limited One Year WarrantyPage It’s More than Accurate, it’s