Back of Display Unit

Adjusts display backlight settings: Off, low, medium, high

2.Integrated Hang Hole for easy wall mounting.

3.Battery Compartment Cover

4.A-B-C Switch

ID code that must match 5-in-1 sensor’s A-B-C switch to ensure units synchronize.

5.Clear Today

Clears data recorded since 12:00am.

6.Reset

Full reset to factory defaults.

7.Clear All

Clears all data recorded.

8.Battery Compartment

9.Plugin for Power Adapter

10.Power Adapter

Image 6

Contents

Professional Weather Center Package Contents Unpacking Instructions Features & Benefits Display Clock Outdoor Sensor Signal Strength Alarm On/Off Indicator Wind Speed Alarm On Indicator Average Wind SpeedStorm Alert Alarm On Indicator Weather Select Programmable Alarm Setting Alarm On/Off Button Back of Display Unit Install or Replace Batteries In-1 Sensor SetupSet the A-B-C Switch Remove Rain Gauge Stabilizer Display Unit Setup Plug-in Power AdapterInstall or Replace Backup Batteries optional Set the Time & Date Set the TimeSet the Date Select Measurement Units Display Unit Placement Placement for Maximum AccuracyImportant Placement Guidelines In-1 Sensor Placement In-1 Sensor Installation In-1 Sensor Installation GuidelinesBasic Setup is Complete Clear Data Collected During Installation Weather Forecast Using the Professional Weather Center Learning ModeProgrammable Weather Alarms Barometric Pressure Set a Weather Alarm Silence a Sounding Alarm Reception TroubleshootingProblem Possible Solution Inaccurate forecast Temperature or Display Unit Care Care & MaintenanceCalibration Calibrate Temperature & Humidity In-1 Sensor Care Calibrate the Rain Gauge Tips Specifications FCC Information Limited One Year Warranty Customer SupportPage It’s More than Accurate, it’s