Installing Your Adaptec Enclosure into a Rack
1Ensure that you have these rackmount kit components:
•Front rails (1 left, 1 right)
•Rear rails, two different lengths (2 left, 2 right)
•20 nuts (10 each of two different types)
•4 small screws and 10 large screws
2Secure the front rails to the front supports of the rack, using the screws or nuts included in the kit. (Use the nuts if your rack does not have
threaded holes.)
)
Secure rear rail, using rail length suitable for your rack
Rear support
Front 
support
Secure front rail
3Select the right length of rails for your rack, then secure them to the rear supports of the rack, as shown above. Then secure the front rails to the rear rails.
Ensure that all the rail connections are tightened and secure.
3 | SANBloc S50 Quick Install Guide |
