4Gently push the lever until it meets the latch on the left side of the drive slot and clicks into place.
5Repeat for all remaining disk drives.
Note To maintain proper airflow and cooling, a disk drive or a blank drive carrier must be installed in every slot of the enclosure.
Connecting to Your Snap Server
Follow the instructions appropriate for your configuration.
Connecting One SANbloc S50 Enclosure
1Power off your Snap Server.
2Use the included 4x SAS cable to connect your Snap Server to the HOST port on the SANbloc S50 enclosure.
Snap Server |
|
|
| SANbloc S50 Enclosure | |
SAS Port | HOST | EXP |
FAULT ! |
| |
SEP MASTER |
| |
| HOST Port | |
7 | SANBloc S50 Quick Install Guide |
