Chapter 7: Installing the Driver and an Operating System ●46
8From the lower window menu, select Continue, then press Enter.
If the driver installation process fails, the server console is displayed so you can see the
cause of the failure.
To modify disk partitions, apply hot fixes, or perform volume maintenance, refer to your
NetWare documentation.
9Continue with Managing Your Storage Space on page 55.
Installing with OpenServer
Note: You will need your OpenServer Installation CD to complete this task.
To install the driver when installing OpenServer:
1Insert the OpenServer Installation CD.
2Restart your co mputer.
3Follow the on-screen instructions to begin the OpenServer installation.
4When prompted to load more HBA drivers, insert the driver disk, then select Yes. (To load
more HBA drivers, repeat th is step.)
5When all drivers have loaded, select No.
6Complete the OpenServer installation, following the instructions included with your
operating system.
7Continue with Managing Your Storage Space on page 55.
Installing with Solaris
Note: You will need a floppy disk to complete this task.
To create a driver disk:
1Start your computer.
2Interrupt the autoboot, press the ESC key. The Device Configuration Assistant (DCA)
Utility will open.
3Select F4_Add Driver.
4Insert a floppy disk.
5Complete the Solaris installation, following the instructions included with your operating
system.