Chapter 8: Installing the Driver on an Existing Operating System ●52
8At the Driver Name menu, press the Insert key.
9Insert the driver disk, press the Insert key, then press F3.
10 At the A:\ prompt, press Enter.
The driver installs.
11 At the Addition al Driver Op tion menu, se lect Return to driver summary
, then
press Enter.
12 At the Driver type menu, select Load on Additional Driver Options.
13 After the driver loads, select Continue.
14 Continue with Managing Your Storage Space on page 55.
Installing on OpenServer
To install the driver on OpenServer:
1Start your computer, then insert the driver disk.
2Begin the driver package installer:
pkgadd -d diskette1
3At the instal ler prompt, t ype
go
.
4Select 1 for the aacraid package.
5When the installation is complete, select q to quit the installer.
6Reboot your computer and remove the driver disk.
7Continue with Managing Your Storage Space on page 55.
Installing on Solaris
To install the driver on Solaris:
1Start your computer.
2Insert and mount the driver disk:
volcheck
3Change to the driver installer directory:
cd /floppy/floppy0/DU/sol_210/i86pc/Tools
4Start the driver installer:
./install.sh -i
5Reboot your computer, then remove the driver disk.
6Continue with Managing Your Storage Space on page 55.